Regardless of the machine, regular maintenance can effectively ensure its work efficiency and product quality. The high-speed engraving and milling machine is no exception. Its failures are due to parts and components. If problems are found, they can be dealt with in time to avoid the situation from expanding. If you turn a blind eye, it may cause huge losses. Therefore, the maintenance of high-speed engraving and milling machine parts is very important.

1. When operating the high-speed engraving and milling machine, ensure that the guide rail surface is clean, and no chips, abrasive particles, etc. fall on it. If there is, it will increase the friction of the guide rail and cause the guide rail to rust. The guide rails need to be maintained and maintained regularly.

2. The guide rail needs to be kept lubricated to avoid friction and other problems, which may cause temperature rise. The guide rail is generally automatically lubricated. If you find that the guide rail is not lubricated, you need to check the diverter valve.

3. The amount of lubricating oil in the guide rail must be checked every day. If the oil is not enough, add lubricating oil; at the same time, pay attention to check whether the oil pump can start and stop regularly, and pay attention to whether it can provide lubricating oil when starting.

4. When processing graphite and ceramics, please use a graphite computer engraving and milling machine. Because processing graphite and ceramic materials, the processing dust is large, and it is easy to enter the guide rail and affect the service life.

When operating a high-speed engraving and milling machine, pay close attention to the use process and deal with problems in time. At the same time, regular maintenance can ensure its stable processing effect, extend its service life, and ensure the quality of engraving and milling.